Voodoo-lab Ground Control(Original Version 2) Manual do Utilizador descarregar pdf (Página 14)

DIGITAL MUSIC CORPORATION

Expanders

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

Expanders allows you to configure your Ground Control for

use with the following:

• GCX Guitar Audio Switcher(s)

• Ground Link

• System Mix Plus

GCX Guitar Audio Switcher

The Ground Control can control up to 4 GCXs to provide any

combination of 32 audio loops and switches. To control GCXs

from your Ground Control, they must be enabled here.

After entering Setup mode, activate this function by pressing

[EXPANDERS]. The display should read:

GCX-1 IS OFF

To enable the GCX, press [+/YES] to turn GCX #1 on. If you

have more than one GCX, press [SELECT ∨] to access the next

GCX. The display will show:

GCX-2 IS OFF

You can continue to enable GCXs #2 through #4.

For most applications, you will use loops as either audio loops

or latching switches. If you need to control a momentary

switch function with one of the GCX loops, you must

configure it as follows:

1. Press [SELECT ∧ or ∨] to select the appropriate GCX.

2. Press [CURSOR >] to access the desired loop. The display

will look like:

LOOP4=NORMAL

3. Press [+/YES] to select "MOM SW" for momentary switch

operation. Press [-/NO] to return to normal.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Sem comentários

Voodoo-lab Ground Control(Original Version 2) Manual do Utilizador Página 14